This is the PCB of a very low distortion balanced lined driver. It accepts unbalanced input and convert the signal to a balanced output.
Application : This can be used either as a converter board for preamplifier or power amplifier that has balanced input, or it can be used as a balanced line driver for driving long cable to an audio equipment far apart. By means of balanced cable the noise being picked up would be minimal.
Circuit feature : The board uses balanced line driver SSM2142. This IC can drive up to 10Vrms to 600 ohm at a super low distortion of 0.006%. The IC is preceded by a buffer formed by an opamp. This allows a very well controlled input impedance for SSM2142 for best performance.
Supply voltage : +/-9v to +/-15V.
The PCB has a board thickness of 1.6mm, and copper thickness of 70um. This is four times normal board copper thickness ! The surface is gold plated and coated with two-sided solder resist for maximum durability.
PCB dimension : 88mm x 55mm
We provide schematic and part list to buyers by EMAIL( to be attached to the shipment notice).
We do air shipping worldwide at US$4.00.
